China Resources Communication Technology - Focusing on Power Saving and Energy Saving Solutions for 22 Years
Service hotline::0755-82127848、82128238、33393678
RVC-PF Reactive Power Compensation Controller
keyword：
RVC-PF Reactive Power Compensation Controller
Category：
Power Energy-Saving Products
Rated voltage: 220V, 380V
Rated frequency: 50HZ/60HZ
Rated power: 15W
Product details
I. Product introduction:
This controller is designed for international market and has been exported to international markets in Southeast Asia, Middle East and Russia. It has powerful functions, backlight field LCD, reliable performance, high interference resistance, RS 232/485 communication interface, MODBUS communication protocol output.
II. Product model number explanation
III. Programmable parameters
CT transformation ratio: 100-8000 (automatically adapting to the phase alternation on CT side of network)
COSφ target value: inductive: 0.70-1.00; capacitive: 0.70-1.00
C/K value: 0.01-0.99
Total harmonic distortion (THD): 0.05-0.40
Step delay: 1-120s
Max. output ways: 12
Undervoltage value: 300-380
Overvoltage value: 420-460
Sequence type: 1.1.1.1..; 1.1.2.3..; 1.2.3.4..; 1.2.4.8..
Alarm switch: ON/OFF
Switching step delay: 1~240s
Delay between steps: 45s
Any step can be set normally ON or OFF
Voltage phase sequence: 0~330
Programmable early connection early disconnection or early connection late disconnection
RS 232/485 communication, MOTBUS protocol output
IV. Alarm and protection function
1. Under current alarm and disconnecting step capacitor
2. Overcurrent alarm
3. Overvoltage alarm and disconnecting step capacitor
4. Undervoltage alarm
5. Low COSФ alarm (lower than COSФ set value when all connected)
6. Abnormal COSФ alarm
7. Capacitance lower than 70% alarm
8. Alarm at 60℃ and disconnecting step capacitor at 70℃
9. THD lower than set value alarm and disconnecting step capacitor
10. Wrong frequency alarm
V. RVC-PF 100V/440V series control schematic diagram
VI. Basic specifications
1. Operating voltage: 100V~440V
2. Frequency range: 50Hz/60Hz ±5%
3. Input current: 0-5A
4. Output voltage: DC 12V or AC 90V~440V
5. Output ways: 12
6. Power consumption: <15W
7. Operating temperature: -25℃~+70℃
8. Relative humidity: max. 95% without condensation
9. Memory function: All parameters and modes are stored in nonvolatile memory
10. Display: Current I, voltage U, active power P, reactive power Q
11. Weight: 1.00kg (excluding package)
12. Elevation: ≤3500M
13. Overall dimensions: 144mm×144mm×80mm (L × W × D)
14. Opening dimensions: 138mm×138mm (L × W)
VII. Standards for GE-PF 100V/120V series products
1. GB/T14549-199 Power System Harmonic Management Standard
2. GB/T15576-1995 The specification of low-voltage reactive power steady compensation equipment
3. JB/T9663-1999 Low voltage reactive power automatic compensating controller
4. DL/T597-1996 Low voltage reactive power compensation controller ordering specifications
5. Products meet UL and CE certification standards and EMC standards of EU for operation at 50/60HZ
Related Products
Add: Room 1803, Caiwuwei Development Building, No. 3083, Bao'an South Road, Luohu District, Shenzhen City
Tel：0755-82127848、82128238、33393678
Fax：0755-82127849
Email ： hrt@hrttech.com
WeChat Consulting
Copyright © 202 Shenzhen Huaruntong Technology Co., Ltd. All rights reserved